5044 B U Bowman Dr #102  :::  Buford, Georgia  30518

e-mail stedipower@tvss.net   :::  Phone: 678.546.6780

Frequently Asked Questions Surge Suppression, Surge
Arresters and Transient Voltage Surge Suppressors

	How is Stedi-Power's approach to producing Surge Suppressors/Arresters different from other manufacturers?
	How are Stedi-Power's Surge Suppressors/Arresters physically and technically different from their competition?
	Why should I choose Stedi-Power?  There are cheaper devices available.
	What is the significance of the 2002 Electrical Code in reference to Surge Suppressors and Arresters?
	Why is it important that you be able to install on the "service side" of the main electrical disconnect?
	My manufacturer tells me that UL (Underwriters Laboratories) does not require information to be posted that the National Electrical Code says I must look for...so there is no problem installing the equipment.
	My manufacturer tells me the lack of information is a "minor detail" and he is sending me labels to apply to my equipment to correct the problem.  Is this true?
	What  is "Power Quality"?

	What is the difference between a Surge Suppressor and a Surge Protective Device (SPD)?
	Why should I take care of surge suppression first?
	What is "Power Factor"?
	How is low power factor corrected?
	Can a surge suppressor improve power factor?  How much?
	Why is installation important?
	Why is power quality getting worse in my area?
	Why install Stedi-Power Surge Suppressors at the main panel?  Why ALL of the panels?
	Why is Stedi-Power called a Surge "Suppressor/Arrester"?
	What is the difference between a Surge Suppressor and a Surge Arrester"?
	Why should I do anything special?  I've been fine up to now...

	What is the significance of the UL 1449 2nd Edition Listing?  Why was it changed?
	What does "User Serviceable" mean?  I've been told it's a feature I should look for.
	Can Stedi-Power Surge Suppressors help me during a "brownout"?
	If we install Stedi-Power Surge Suppressors/Arresters will I see a reduction of motor heat and noise?  How much?
	Do Stedi-Power Systems require maintenance?
	How can a Surge Suppressor save electricity if my utility (or electrical engineer) says it's not possible?
	Can any surge suppressor reduce maintenance, repair, and replacement costs?

	What does "Clamping Voltage" mean?
	Is Clamping Voltage Important?
	What does "Let-Through-Voltage" mean?
	What does "Reaction Time" or "Reaction Speed" mean?
	I've been told "Reaction Speed" isn't important.  Is this true?
	DA competitor is claiming "picosecond" reaction time.  Is this better?
	I don't have a "Lightning Problem".  Why do I need this protection?
	Do I really need this equipment?  Will I see benefit?

Stedi-Power, Inc
5044 B U Bowman Drive #102
Buford, Georgia 30518
PHONE: (678) 546-6780

Last Updated: 07 Jun 2004
©1997-2004 Stedi-Power, Inc.
All trademarks are the property of their respective owners
All other rights reserved.